Well, I promised you some pix, and these are them. Finally we have our VPN sorted out with our ISP, so SSL and FTP now work. Which is good, because for a while, I was SOL.
This is the new longeron yoke on the squeezer.. Believe it or not, it works. Next to it is a rivet gauge. It checks shop heads for minimum width and height.
Riveted on the hinge bracket for the VS.
Blurry art-house pic of the flush rivets on the VS forward spar.
Better pic of the forward spar. Notice flush rivets where this part has to somehow connect with something on the fuselage.
Doubler clecoed to VS forward spar. the NO NO NO NO NO thing is something I made up to keep myself from riveting the holes where the rib goes on. P-touch to the rescue.
Flush rivets and clecoed spar/doubler/hinges.
Pictures!.
< NO TAGS >
Comments (0)