4 hours.
Yesterday I glued the sub-ramp I made the day before to the cowl. Today, I shot my marine foam into the space underneath the ramps in preparation for glassing in the sides and blocking travel of high pressure air through the spaces underneath the ramps to the low-pressure area to the sides and below the baffles.
I may have used too much foam. It just keeps growing.
Tomorrow I’ll carve out the excess foam and glass in the tunnels.
I also took a crack at filling the area around the oil door. This might turn out badly, but it’s just resin and micro, so I can always sand it off and start over.
Comments (0)